The first flight test was inside a building. As the GPS coverage was very bad, we select the Alt Hold flight mode in order to use the barometer of the autopilot. Here you have the first flight: As you can see, we crashed. The problem was the pitch. By default, Read more…
Last but not least, this is the final step before the flight test.Here, we are going to explain the final set up of the platform in order to test the motors and try, without propellers, that everything is working fine. In order to complete the set up, we followed another Read more…
Now its time to finish the assembly with all the components needed to fly. There is another helpfull video to fix everything well: The steps followed are: Fix the autopilot to the upper body. Fix the radio receiver and connect it into the autopilot. Connect the motors to the autopilot Read more…
Now, its time for the brain of the Drone, the Autopilot. In our case, the one used is the Pixhawk Orange Cube. It is capable of generating the set of PWM signals necessary to perform basic flight operations (take off, land, move forward, move left/right or rotate) related with the Read more…
The frame assembly is diveded in two parts because before mounting everything, we have to do some calibrations in the Autopilot. So in this first part, only the arms, motors, ESCs, upper body and the power distribution board are mounted. Here you have some pictures about this process:
The third step of this phase 1 is based on learning how to configure it correctly to control the speed of one of the motors that we will use and the position of a servo. So, in order to do this activity, the following list of components are needed: Radio. Read more…
In this activity, you will see all the elements provided in order to assemble the drone and be able to fly it. There are a total of 13 elements: In addition, there are two elements, battery and propellers, that for safety reasons, were only delivered at the time of flight Read more…
The objective of this activity is to know the systems and components of a Drone to be able to use and configure them correctly throughout the project. For this, different videos related to the basic components of the Drones were watched. Below are all the links of these videos: After Read more…
Welcome to the blog of Dmitrii and Eduard! First of all we will introduce ourselves in order to know a little bit about us. Dmitrii is a telecommunications engineer with many years of experience in the television broadcast sector, he studied at St. Petersburg University and at the Military school. Read more…
Content Expérience des joueurs Moyens de dépôt et de retrait Avis sur le casino en ligne Winspark ( Une Interface Intuitive et Réactive A chaque fois que vous effectuez un dépôt via Sofort, un bonus vous est accordé instantanément. Les gains que vous obtenez grâce à l’utilisation de ce bonus Read more…